產品及服務介紹
半自動
詳細說明
Spec. table:
1. Leveling Foot |
8. Rotating Sample Stage |
15. Tilting Syringe Lock |
2. Main Base Plate |
9. Needle Guide Tube |
16. Upper Gantry (Moving Handle) |
3. Sample Stage Assembly |
10. Syringe |
17. Video Connector |
4. Lock Block |
11. Syringe Push Block |
18. Fuse Holder |
5. Vertical Adjustment |
12. Manual Syringe Drive Knob |
19. Serial Connector |
6. Guide Rails |
13. Motorized Syringe Assembly |
20. AC Power Inlet |
7. Back Light Module |
14. Tilting Syringe Block |
21. Platform Power Switch |
Applications:
- Coating assessment of the HMDS process
- Surface contamination detection
- Adhesive and primer preparation
- Coating uniformity
- Coating quality
- Surface cleanliness
Hardware Features
- High-resolution video camera with magnifying lens with high intensity LED lighting for precise image capture
- 300mm rotating stage, allows access to all areas of the wafer
- High-end PC is standard with high-performance video board for advanced image analysis and video capture
- Flat Screen Monitor
Software Features
- Automatic contact angle imaging and calculation
- Dynamic droplet capture (movie viewing of droplets)
- Surface energy (dynes/cm) analysis
- SPC (Statistical Process Control)
- Pendant Drop surface analysis
Syringe Assembly
- Vertical Orientation
- Straight Needle
- Motorized Drive Mechanism
- 1.8 Degree Stepping Motor
- Syringe Head: Tilt back for safe and easy removal of large samples
Sample Platform
- Platform size and shape 12” Circular
- Sample size and shape 4”, 6”, 8”, 12” circular Not wider than 12”
- Movement along the optical axis 6” by hand sliding with lock
- Movement transverse to the optical axis 6” by dial
- Vertical traveling distance 2” by dial
- Rotating 360 degrees by hand with Planary Bearing
- 接觸角
- 水滴角
- 表面能
- 潔淨度
- 微結構
- 達因值
- contact angle
- video contact angle analyzer
- surface roughness
- dyne value
- cleanliness
- microstructure